Gutter installation in Camarillo is something we do only alongside roofing work. When we replace a roof or complete a major roof repair, we can take down tired gutters and install new ones in the same project, because the drip edge, fascia and first course of roofing all meet at that edge.
We do not take standalone gutter jobs. Bundling them with the roof means the gutter hangs in the right relationship to the drip edge, the fascia gets inspected while it is exposed, and your roof photos include the edge detail.
What New Gutters Include With Your Roof
Old gutters and downspouts come down during the roof tear-off, and the new system is built around the new roof edge.
Seamless Aluminum Gutters
New aluminum gutters are formed on site into continuous runs, with joints only at corners and ends. Hidden hangers are spaced along each run, outlets are placed where valleys dump water, and downspouts are routed to carry it away from the foundation.
Drip Edge Integration
Code requires drip edge at the eaves and rakes of shingle roofs, extending at least 1/4 inch below the sheathing, with joints lapped at least 2 inches. We hang the gutter in relation to that metal so water leaving the roof drops into the trough rather than down the fascia.
Fascia Repair
Overflowing gutters often rot the board behind them, and a roof project is the one time that board is fully exposed. With the gutters off, we photograph the fascia, replace rotted sections and photograph the repair again before the new gutter covers it.
Leaf and Ember Guards
Optional metal mesh guards keep leaves, needles and embers out of the gutter. In mapped fire hazard zones they also help meet the code's call for a way to keep debris out, as the comparison below explains.
Signs Your Gutters Should Go When the Roof Does
- Leaking seams and corners, or rust on old steel gutters
- Gutters pulling away from the fascia or sagging between hangers
- Water overflowing where a valley empties into the gutter
- Stained or rotted fascia boards behind the gutter
- Soil washed out or puddling along the foundation
- Vinyl gutters on a home in a fire hazard zone
If the roof is being replaced anyway, keeping tired gutters means removing and rehanging them around the new drip edge. Replacing them in the same roof replacement is usually cleaner.
AfterHow Gutter Installation in Camarillo Fits Your Roof Project
- Inspection. During your free roof inspection we check gutters, fascia and downspout drainage.
- Proposal. Gutters appear as their own line items inside the roof proposal.
- Tear-off. Old gutters come down with the roof, and fascia repairs happen while the edge is open.
- Roof edge. Drip edge and the first courses of roofing go on.
- Gutters and downspouts. Formed, hung and pitched toward the outlets.
- Water test and closeout. We run water through the system, clean up and add the gutters to your photo set.
Gutter and Guard Options Compared
| Option | What it is | Where it fits |
|---|---|---|
| Continuous aluminum gutters | Formed on site to length, few joints, noncombustible | Most homes, including fire hazard zones |
| Larger gutters and downspouts | More capacity per run | Long eaves and spots where valleys concentrate water |
| Metal mesh guards | Noncombustible screen over the gutter | Homes near trees and in fire hazard zones |
| Vinyl gutters | Plastic sections joined with connectors | Not used in fire hazard zones, where code calls for noncombustible gutters |
In mapped fire hazard zones, the California Wildland-Urban Interface Code requires noncombustible gutters and downspouts and an approved means to keep leaves and debris out of the gutter. We confirm with the building department which guard products it accepts. See fire-resistant Class A roofing for the rest of the roof.
What Affects the Cost of Gutters With a New Roof
- Linear footage. The total length of eaves that need gutters.
- Corners and downspouts. Each mitered corner and downspout adds material and labor.
- Height. Second-story runs need more setup.
- Fascia repair. Rotted boards found behind old gutters.
- Guards. Mesh guards add material cost.
- Drainage. Extensions or connections that carry water away from the house.
Because the gutters go up during the roof project, there is no second setup or separate trip. California's limit on home improvement down payments, $1,000 or 10 percent of the contract price, whichever is less, applies to the whole project.
Gutters in Camarillo: Rain, Leaves and Embers
Camarillo gets most of its rain between December and March, after a long dry season. Leaves and dust pile up in gutters for months, then the first storm overflows them onto the fascia and foundation.
Around the foothills, gutters also collect dry debris that embers can ignite, which is why fire hazard zones require noncombustible gutters with debris protection. Near the coast in Oxnard and Port Hueneme, we pair aluminum gutters with corrosion-resistant hangers and fasteners to stand up to salt air.
